Thermodynamics, Heat and Mass Transfer
Code: EG 452 ME
Code: EG 452 ME
Course objective
To provide the student with a basic understanding of thermodynamics, heat transfer and fluid flow.
1. Introduction
1.1
Definition and scope of Engineering
Thermodynamics
1.2
Value of energy to society
1.3
Microscopic versus Macroscopic Viewpoint
1.4
Concepts and definitions
1.4.1
System, Surrounding, Boundary and Universe,
Closed Systems, Open Systems, and Isolated Systems
1.4.2
Thermodynamic Properties: Intensive, Extensive
and Specific Properties
1.4.3
Thermodynamics Equilibrium
1.4.4
State, Process and Path, Cyclic Process,
Quasi-equilibrium Process, Reversible and Irreversible Process
1.4.5
Common Properties, Pressure, Specific Volume,
Temperature
1.5
Zeroth Law Thermodynamics, Equality of
Temperature
2. Energy and Energy Transfer
2.1
Energy and its meaning
2.2
Stored Energy and Transient Energy, Total Energy
2.3
Energy Transfer
2.3.1
Heat Transfer
2.3.2
Work Transfer
2.4
Expression for displacement work Transfer
2.5
Power
3. Properties of Common Substance
3.1
Pure Substance and State Postulate
3.2
Ideal Gas and Ideal Gas Relations
3.3
Two Phase (Liquid and Vapor) System: Phase
Change, Subcooled Liquid, Saturated Liquid, Wet Mixture, Critical Point,
Quality, Moisture Content, Saturated Vapor and Superheated Vapor
3.4
Properties of Two Phase Mixtures
3.5
Other Thermodynamic Properties: Internal Energy,
Enthalpy, and Specific Heats
3.6
Development of Property Data: Graphical Data Presentation
and Tabular Data Presentation
4. First Law of Thermodynamics
4.1
First Law of thermodynamics for Control mass,
and for Control mass undergoing cyclic process
4.2
First law of Thermodynamics for Control Volume
4.3
Control Volume Analysis: Steady State Analysis and
Unsteady state analysis
4.4
Control Volume application: Steady and Unsteady
Work Applications and Steady and Unsteady flow applications
4.5
Other statements of the first law
5. Second Law of Thermodynamics
5.1
Necessity
of formation of Second law
5.2
Entropy and second law of thermodynamics for an
isolated system
5.3
Reversible and irreversible Processes
5.4
Entropy and Process Relation for an Ideal Gases
and Incompressible substances
5.5
Control mass and control volume formulation of
second law
5.6
Isentropic process for an Ideal gas and for an
incompressible substances
5.7
Carnot Cycle, Carnot Efficiency
5.7.1
Heat Engine and Thermal Efficiency, Heat Pump,
Refrigerator and coefficient of Performance(COP)
5.7.2
Kelvin-Planck and Clausius Statenebts of the
Second law of thermodynamics and their equivalence
6. Thermodynamic Cycles
6.1
Classification of Cycles
6.2
Air Standard Analysis
6.2.1
Otto Cycle
6.2.2
Diesel Cycle
6.2.3
Brayton Cycle
6.3
Rankine Cycle
6.4
Vapor Compression Refrigeration Cycle
7. Introduction to Heat Transfer
7.1
Basic Concepts and Modes of Heat Transfer
7.2
One dimensional steady state heat conduction
through a plane wall
7.3
Radial steady state heat conduction through a
hollow cylinder
7.4
Heat flow through composite structures
7.4.1
Composite Plane wall
7.4.2
Multilayer tubes
7.5
Electrical Analogy for thermal resistance
Evaluation Scheme:
Chapter
|
Hours
|
Marks Distribution
|
1
|
4
|
10
|
2
|
4
|
4
|
3
|
6
|
12
|
4
|
8
|
14
|
5
|
9
|
14
|
6
|
8
|
14
|
7
|
6
|
12
|
Total
|
45
|
80
|
There may be may be minor deviation in marks distribution
Textbooks and References:
1.0 W.C. Reynolds, “Engineering Thermodynamics”, McGraw-Hill, 2nd Edition, 1970.
2.0 V.M. Faires, “Thermodynamics”, Macmillan.
3.0 M.N. ozisik, “Heat Transfer – A Basic Approach”, McGraw-Hill, 1985.
4.0 de Witt, “Fundamentals of Heat and Mass Transfer”, Wiley 1985.
5.0 Saberski, Acosta and Hauptmann, “Fluid Mechanics”.
6.0 V.L. Streeter, Acosta and Hauptmann, “Fluid Mechanics”, Latest Edition, McGraw Hill.
